View STG3157_77058.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STG3157
LOW VOLTAGE LOW ON RESISTANCE SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE
s
s
s
s
s
s
s
HIGH SPEED: tPD = 0.3ns (MAX.) at VCC = 4.5V tPD = 0.8ns (MAX.) at VCC = 3.0V tPD = 1.2ns (MAX.) at VCC = 2.3V VERY LOW POWER DISSIPATION: ICC = 1A(MAX.) at TA=85C LOW "ON" RESISTANCE VIN=0V: RON =7(MAX.TA=85C) atVCC =4.5V RON = 9 (MAX. TA=85C) at VCC = 3.0V WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 1.65V to 5.5V SINGLE SUPPLY TTL THRESOLD ON CONTROL INPUT at VCC = 2.7 to 3.6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 3157 LATCH-UP PERFORMANCE EXCEEDS 300mA (JESD 17)
SOT323-6L
ORDER CODES
PACKAGE SOT323-6L T&R STG3157CTR
DESCRIPTION The STG3157 is an high-speed spdt CMOS ANALOG S.P.D.T. (Single Pole Dual Throw) SWITCH or 2:1 Multiplexer/Demultiplexer Bus Switch fabricated in silicon gate C2MOS tecnology. It designed to operate from 1.65V to 5.5V, making this device ideal for portable applications. It offers very low ON-Resistance (<9) at VCC=3.0V. The IN input is provided to control the S.P.D.T. switch, it's compatible with standard PIN CONNECTION AND IEC LOGIC SYMBOLS
CMOS output. The switch S1 is ON (it is connected to common Port D) when the IN input is held high and OFF (high impedance state exists between the two ports) when IN is held low; the switch S2 is ON (it is connected to common Port D) when the IN input is held low and OFF (high impedance state exists between the two ports) when IN is held high. Additional key faetures are fast switching speed, Break Before Make Delay Time and Very Low Power Consumption. All inputs and output are equipped with protection circuits against static discharge, giving them ESD immunity and transient excess voltage. It's available in the commercial temperature range in smallest six lead smd package on the market.
September 2002
1/10
STG3157
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 1, 3 4 6 5 2 SYMBOL S1, S2 D IN VCC GND NAME AND FUNCTION Independent Channel Common Channel Control Positive Supply Voltage Ground (0V)
TRUTH TABLE
IN H L
*) High Impedance
SWITCH S1 ON OFF(*)
SWITCH S2 OFF(*) ON
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VIC VO IIKC IIK IOK IO Supply Voltage DC Input Voltage DC Control Input Voltage DC Output Voltage DC Input Diode Current on control pin (VIN< 0V) DC Input Diode Current (VIN< 0V) DC Output Diode Current DC Output Current Parameter Value -0.5 to +7.0 -0.5 to VCC + 0.5 -0.5 to Vcc + 0.5 -0.5 to VCC + 0.5 50 50 20 + 128 100 -65 to +150 300 Unit V V V V mA mA mA mA mA C C
ICC or IGND DC VCC or Ground Current Storage Temperature Tstg TL Lead Temperature (10 sec)
Absolute Maximum Ratings are those values beyond which damage to the device may occour. Functional operation under these condition is not implied
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VIC VO Top dt/dv Supply Voltage (note 1) Input Voltage Control Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time Control Input for Vcc= 2.3V - 3.6V Input Rise and Fall Time Control Input for Vcc= 4.5V - 5.5V Parameter Value 1.65 to 5.5 0 to VCC 0 to 5.5 0 to VCC -55 to 125 0 to 10 0 to 5 Unit V V V V C ns/V
1) Truth Table guaranteed: 1.2V to 6.0V
2/10
STG3157
DC SPECIFICATIONS
Test Condition Symbol Parameter VCC (V) TA = 25C Min. 0.75VCC 0.7VCC 2 0.25VCC 0.3VCC VS=0V IS=30mA VS=2.4V IS=30mA VS= 4.5V IS=30mA 3.0 VS=0V IS=24mA VS=3V IS=24mA 2.3 VS=0V IS=8mA VS=2.3V IS=8mA 1.65 VS=0V IS=4mA VS=1.65V IS=4mA RON ON Resistance Match between channels 4.5 3.0 2.3 1.65 RFLAT ON Resistance FLATNESS 5.0 3.3 2.5 1.8 IOFF OFF State Leakage Current 1.65-1.95 VS=3.15V IS=30mA VS=2.1V IS=24mA VS=1.6V IS=8mA VS=1.15V IS=4mA VS=0 to VCC IS=30mA VS=0 to VCC IS=24mA VS=0 to VCC IS=8mA VS=0toVCC IS=4mA VS=0 to VCC 4.4 4.9 6.1 5.2 7.8 6.5 9.6 9.0 14 0.10 0.8 7 12 15 9 20 12 30 20 50 Typ. Max. Value -40 to 85C Min. 0.75VCC 0.7VCC 2 0.25VCC 0.3VCC 0.8 7 12 15 9 20 12 30 20 50 Max. -55 to 125C Min. 0.75VCC 0.7VCC 2 0.25VCC 0.3VCC 0.8 9 14.5 18 11 24 14.5 36 24 60 V Max. V Unit
VIH
High Level 1.65-1.95 Input Voltage 2.3-5.5 2.7-3.6 Low Level 1.65-1.95 Input Voltage 2.3-5.5 Switch ON Resistance 2.7-3.6 4.5
VIL
RON
0.10 0.20 0.35 3 6 14 80 0.05 0.1 1 10 A
3/10
STG3157
Test Condition Symbol Parameter VCC (V) 0 - 5.5 VIN= 0 to 5.5V TA = 25C Min. Typ. 0.05 Max. 0.1
Value -40 to 85C Min. Max. 1 -55 to 125C Min. Max. 10 A A Unit
IIN
ICC
Input Leakage Current Quiescent Supply Current (All Channel ON or OFF)
5.5
VIN=VCC or GND
1
1
10
AC ELECTRICAL CHARACTERISTICS (CL = 50pF, RL = 500)
Test Condition Symbol Parameter VCC (V) 1.65-1.95 2.3-2.7 3.0-3.6 4.5-5.5 1.65-1.95 2.3-2.7 3.0-3.6 4.5-5.5 1.65-1.95 2.3-2.7 3.0-3.6 4.5-5.5 1.65-5.5 5 3.3 TA = 25C Min. Typ. Max. 1.2 0.8 0.3 15 11 7 5.2 10 7 5 3.5 Value -40 to 85C Min. Max. 1.2 0.8 0.3 20 14 7.6 5.7 13 7.5 5.3 3.8 -55 to 125C Min. Max. 1.8 1.2 0.5 27 17 9 7 16 9 6.5 5 Unit
tLH, tHL
Propagation Delay
VI=OPEN
ns
tPZH, tPZL Output Enable Time (D to Sn)
tPLZ, tPHZ Output Disable Time (D to Sn)
7 3.5 2.5 1.7 3 2 1.5 1.7 0.5 23 19
7 3.5 2.5 1.7 3 2 1.5 1.7 0.5
7 3.5 2.5 1.7 3 2 1.5 1.7 0.5
ns
ns
tD Q
Break Before Make Time Delay Charge injection
ns pC
ANALOG SWITCH CHARACTERISTICS (CL= 5pF, RL=50, TA=25C)
Test Condition Symbol Parameter VCC (V) 1.65-5.5 1.65-5.5 1.65-5.5 RL= 50 f= 10MHz RL= 50 f= 10MHz RL= 50 TA = 25C Min. Typ. -57 -54 250 5 5.0 5.0 f= 1MHz 21 f= 1MHz 13 pF Max. Value -40 to 85C Min. Max. -55 to 125C Min. Max. dB dB MHz Unit
OIRR Xtalk BW CIN CSn CD 4/10
Off Isolation Crosstalk -3dB Bandwidth Control Pin Input Capacitance Sn Port Capacitance D Port Capacitance when Switch is Enabled
STG3157
ON RESISTANCE OFF ISOLATION
ON LEAKAGE
BANDWIDTH
OFF LEAKAGE
CHANNEL TO CHANNEL CROSSTALK
5/10
STG3157
TEST CIRCUIT
TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ
CL = 50pF or equivalent (includes jig and probe capacitance) RL = R1 = 500 or equivalent RT = ZOUT of pulse generator (typically 50)
SWITCH Open VCC GND
SWITCHING TIMES WAVEFORM
6/10
STG3157
SWITCHING TIMES WAVEFORM
BREAK BEFORE MAKE TIME DELAY
CHARGE INJECTION ( VGEN=0V, RGEN=0, R L=1M, CL=100pF)
7/10
STG3157
SOT323-6L MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.10 0.80 0.00 0.80 0.15 0.10 1.80 1.80 1.15 0 .65 1.3 0.30 3.9 TYP MAX. 1.10 0.10 1.00 0.30 0.18 2.20 2.40 1.35 MIN. 31.5 0.0 31.5 5.9 3.9 70.9 70.9 45.3 25.6 51.2 11.8 TYP. MAX. 43.3 3.9 39.4 11.8 7.1 86.6 94.5 53.1 mils
8/10
STG3157
Tape & Reel SOT323-xL MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.98 3.98 2.25 2.7 1.2 4 4 4.2 4.2 0.156 0.156 175 12.8 20.2 59.5 60 60.5 14.4 0.088 0.106 0.047 0.157 0.157 0.165 0.165 TYP 180 13 MAX. 185 13.2 MIN. 6.889 0.504 0.795 2.362 0.567 TYP. 7.086 0.512 MAX. 7.283 0.519 inch
9/10
STG3157
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com
10/10

▲Up To Search▲

Price & Availability of STG3157

	To Download STG3157 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .